FLEXTRAL
NZ-24

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Flextral directly.***
The Flextral NZ-24 (NZ-24) is a robust hydraulic hose designed for high-pressure applications in hydraulic systems using petroleum or water-glycol based fluids, as well as for fuel and lubricating oils. This model, part of the NZ series, features a 1.5-inch internal diameter and an outer diameter of 2.09 inches (53.00 mm). It is built to handle maximum working pressures up to 4300 psi with a minimum burst pressure of 17200 psi, ensuring safety and reliability in demanding environments. The NZ-24 hose exceeds the performance requirements of SAE 100R12 and EN856 R9R4SH standards, making it highly suitable for rigorous use in various hydraulic systems. It incorporates four spirals of high-tensile wire for reinforcement and has a durable cover made from black synthetic rubber that is resistant to oil, abrasion, and weather conditions. Additionally, this cover is MSHA approved, indicating compliance with stringent mining safety guidelines. Designed for flexibility and long service life, the NZ-24 has a minimum bend radius of 22 inches (560 mm), facilitating its use in tight spaces without compromising its integrity or performance. The hose can be supplied in lengths ranging from a minimum of 12 inches to a maximum of 1200 inches (100 feet), packaged in coils for convenient handling and installation. This product's versatility extends to its temperature range capabilities from -40°C to +100°C (-40°F to +212°F), allowing it to perform optimally in diverse climatic conditions. The coupling series recommended for this hose is Series N, which complements its specifications for secure and effective coupling solutions. Suitable applications include not only typical hydraulic uses but also marine contexts as it meets the SAE J1942/1 USCG H standards.