You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

HYDRAFORCE
5542165


$406.33 USD
  • HYDRAFORCE
  • Material:5542165
  • Model:HSV12-28M-12HT-U-24ER SOLENOID VALVE
  • Summary:SOLENOID CARTRIDGE VALVE BI-DIRECTIONAL, NORMALLY CLOSED

Due to extremely high demand, please call 920-337-0234 for availability

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5542165 (HSV1228X) is a high-performance hydraulic cartridge valve designed for demanding applications requiring robust load holding or blocking capabilities with minimal internal leakage. This 2-way, piloted, poppet-type, normally closed, bidirectional valve is engineered to allow flow in both directions when energized and block flow when de-energized. Its manual override feature, which should be used only in emergencies and not for continuous operation, allows for the manual shifting of the valve by pushing down and rotating the knob 180 degrees in either direction; pulling on the knob can increase flow. The HSV1228X is built with a hardened seat to ensure long life and maintain low leakage levels. It features a continuous-duty rated coil and efficient wet-armature construction that enhances its durability and performance under varied conditions. The unitized, molded coil design along with optional waterproof E-Coils rated up to IP69K make this valve suitable for environments where moisture or dust ingress is a concern. Additionally, the optional coil voltages and terminations offer flexibility for different electrical requirements. This Hydraforce valve comes with cartridges that are voltage interchangeable, adding to its versatility across different systems without needing complete replacements. The design also includes a cost-effective cavity and is complemented by solenoid tubes and coils that are rated for 960-hour salt spray, indicating superior resistance to corrosion. Tested rigorously to NFPA specification T2.6.1 with verification levels of 90% and assurance levels of 99%, this product promises reliability and high performance in hydraulic systems operations.

Unit weight: 0.28 kg (0.61 lb)
Without coil and nut

Internal wetted surface area: 183 cm² (28.4 in²)
HSV12-28
188 cm² (29.1 in²)
HSV12-28M

RatingsPressure Ratings
Pressure rating: 350 bar (5075 psi)
420 bar (6090 psi)
10% cycle life

Proof pressure: 690 bar (10000 psi)

Burst pressure: 1380 bar (20000 psi)

Flow Ratings
Flow rating: 113.6 lpm (30 gpm)

Maximum internal leakage: 7 drops/min
With at port 2 350 bar (5075 psi)

Other Ratings
Cycle life: One million cycles

Temperature Ratings
Operating fluid temperature: -40 to 100 °C (-40 to 212 °F)
With buna N seals
-26 to 204 °C (-15 to 400 °F)
With fluorocarbon seals
-54 to 107 °C (-65 to 225 °F)
With urethane seals

Storage temperature: -40 to 70 °C (-40 to 160 °F)

Ambient temperature: -40 to 90 °C (-40 to 194 °F)
Operating ParametersFluids: Mineral based or synthetic hydraulic fluid with lubricating
properties

Fluid viscosity range: 7.4 to 420 cSt

Maximum operating contamination level: 18/16/13 per ISO 4406
Performancehttps://www.hydraforce.com/globalassets/product-images/hsv12-28_perf_chrt2022-02-24.gif

Installation SpecificationsCavity: HVC12-2
12-size-2-way Cavities
Cartridge installation torque: 183 to 196 N-m (135 to 145 ft-lb)
Steel/ductile iron cavity
122 to 136 N-m (90 to 100 ft-lb)
Aluminum cavity

Orientation restriction: None
Order CodePOSITION CODE DESCRIPTION HSV12-A28AE-H-J-L-M A Position Sensor Option A 28 Standard A P28A Position Indicator Switch with Resticted Flow E Manual Override E BLANK NONE E M Two Position Override, Red Knurled Knob H Line Body H 0 No Body H 12HT Ductile Iron SAE 12 J Seal J N Buna-N J V Fluorocarbon J U PPDI Urethane L Coil L 0 No Coil L 10EL 10 VDC, E-Coil, Dual Lead Wires L 10ER 10 VDC, E-Coil, Deutsch L 10ER/Z 10 VDC, E-Coil, Deutsch with Zener Diode L 12EG 12 VDC, E-Coil, DIN 43650 L 12EJ 12 VDC, E-Coil, AMP Jr. L 12EL 12 VDC, E-Coil, Dual Lead Wires, 18 inches long L 12EL/36 12 VDC, E-Coil, Dual Lead Wires, 36 inches long L 12EL/W/Z 12 VDC, E-Coil, Dual Lead Wires with WeatherPak and Zener Diode L 12EL/Z 12 VDC, E-Coil, Dual Lead Wires with Zener Diode L 12ER 12 VDC, E-Coil, Deutsch L 12ER/Z 12 VDC, E-Coil, Deutsch with Zener Diode L 12EY 12 VDC, E-Coil, Metri-Pack 150 L 12EY/Z 12 VDC, E-Coil, Metri-Pack 150 with Zener Diode L 20ER 20 VDC, E-Coil, Deutsch L 24EG 24 VDC, E-Coil, DIN 43650 L 24EJ 24 VDC, E-Coil, AMP Jr. L 24EL 24 VDC, E-Coil, Dual Lead Wires, 18 inches long L 24EL/36 24 VDC, E-Coil, Dual Lead Wires, 36 inches long L 24EL/W/Z 24 VDC, E-Coil, Dual Lead Wires with WeatherPak and Zener Diode L 24ER 24 VDC, E-Coil, Deutsch L 24ER/Z 24 VDC, E-Coil, Deutsch with Zener Diode L 24EY 24 VDC, E-Coil, Metri-Pack 150 L 24EY/Z 24 VDC, E-Coil, Metri-Pack 150 with Zener Diode M Position Sensor Termination M BLANK No Position Sensor M M3 Neutral Sense, M12-4P, Dual Output NC/NO M N3 Neutral Sense, DT04-4P, Dual Output NC/NO
https://www.hydraforce.com/globalassets/product-images/hsv12-28_dim_dwg2022-02-24.gif


Seal kit: SK12-2N-M
Buna N
SK12-2V-M
Fluorocarbon
SK12-2U-O
Urethane
Seal kit installation instructions
Housings:
Available
12-2w valve bodies
Coils:
10 size E
coils

Product PDF File Download Product PDF File